Select Page

Jackson Kayak

Bite FD


Jackson Kayak

Coosa FD


Jackson Kayak

Big Rig FD



From bow to stern, Flex Drive 3D integrates propulsion, power and precision into a unified system that delivers unparalleled versatility, efficiency and convenience. Designed from the water up for maximum performance, intuitive use and ease of maintenance; Flex Drive 3D empowers anglers, sportsmen and enthusiasts to get closer to the action. Backward compatible with all Jackson Kayak Flex Drive boats. Check our FAQ page for questions.


The power to get you there. And back.

The new Flex Drive 3D takes fun, freedom and efficiency to a new level. Compact and lightweight (under eight pounds), our Flex Drive E motor interchanges with the Flex Drive3D pedal in seconds to offer an effortless power source for getting to and from secret fishing spots, beaches and campsites.


Leaves other systems in its wake.

The only drive system on the market that combines quick-interchange pedal and electric drive, shallow water 3-position engagement with auto retract dagger board/prop safety release, intuitive forward and reverse operation, sealed above-water pedal system, and a satisfaction guarantee warranty.


Precisely where you want to be.

With a history of continuous improvement, we have also enhanced the new FlexDrive3D rudder and stearing control. This improved steering system allows for more precise placement, truer tracking, tighter turning radius’ and less input demands for more hands-free navigation in both forward and reverse. FlexDrive3D Trac2 can be retrofitted to any existing FlexDrive3D kayak.


Upper Unit

Starting with the upper unit (A), we’ve upgraded the bearings (B) so they are optimized while spinning at relatively low RPM (ideal for pedaling or while using a 12V battery setup with our Flex Drive E). The fit of the crank arm (C) is now more secure and easier to deploy. The spider coupling (D) has been updated to include a time-released lubricant and provides a more secure mating of upper and lower units. We’ve also added easy-access grease ports (E) and a grease accessory kit, which includes a tube of Finish Line grease and a grease gun to make maintenance a breeze. We’ve upgraded the pedal crank arms (F) from cast to forged aluminum, increasing durability.

The upper unit is still a sealed system, which means no gears or moving parts are below the waterline.

Lower Unit

We’ve tightened the tolerances on the lower unit (G)’s flexible shaft (H), which results in a dramatic reduction in noise on the water because of the vibration in the lower unit, making it noticeably more quiet.

The propeller (I) is now a two-bladed, 10” x 10 pitch prop which is optimized for pedaling or when using a 12V battery system with our Flex Drive E. This prop maximizes efficiency and cuts through water smoothly, and when used with the Flex Drive E helps the motor go faster for longer periods of time on the water, while minimizing battery consumption.

The lower unit is not a sealed system. This allows water to drain from the system easily.

You can view the user manual here: 

Flex Drive 3D User Manual